Care instructions

Our care instructions are based off manufacturer recommendations to ensure you can maintain the condition of the fabrics for a longer period of time. washing with high RPM or temperatures will put a strain on the fibres and therefore impact the longevity of the fabrics.

Polyester fibres

PUL (Polyurethane Laminate):

Warm machine wash (no hotter than 40°). Avoid tumble drying, dry on low if required. Do not iron. Do not use any bleach or oxy-type products when washing. 

Minky, Double Brushed Polyester, Swim

Warm or hot machine wash (no hotter than 40°). Air dry, or tumble dry on low. Do not use any fabric softeners. Do not iron.

AWJ, Suede Cloth

Warm or hot machine wash (no hotter than 60°).  Air dry, or tumble dry on low. Do not use any fabric softeners. Do not iron. Can be washed at hot temperatures however warm (40°) is suggested to preserve the condition of the fabric and extend the lifespan.

Synthetic Leather

Spot clean with a damp cloth, do not machine wash. Do not iron on printed side; cool iron on reverse.
Dry in shade only, do not use any bleach or oxygen-type solutions, do not use soap  

Cotton based fibres 

Cotton Lycra, Cotton Poplin, French Terry, Linen, Muslin

Prewash on a warm wash (40°) before use. We recommend using colour catchers to avoid colour run, and to wash alone to prevent any dye transfer. Up to 5% shrinkage may occur. Subsequent wash cycles should be cold/warm. Avoid tumble drying if possible (cotton and cotton lycra may be tumbled on low if necessary), and air dry in the shade instead.

Bamboo French Terry

Before use, prewash twice on hot (60°) and dry between each pre-wash. Can be washed at hot temperatures however warm is suggested to preserve the condition of the fabric and extend the lifespan. Up to 10% shrinkage may occur. Air drying is preferred however can be tumble dried.